Learn

No Tools Installation

All Redi Shade products from Original to Artisan Custom feature no-tools installation. Install Redi Shade window shades yourself in seconds featuring either Simple Stick or Simple Fit Installation Methods.

Select the shade type below for specific instructions on measurement and installation. 

 

Simple Stick Installation ™

No tools needed to have your shade up in seconds. Simply peel the shade liner, then press to adhere the shade to your window.



simple stick

Simple Fit Installation ™

With the push of a button, our Simple Fit installation system locks your shade in place. Don’t worry about drills, brackets or hardware — our patented compression system expands to lock your shade in place, keeping them mounted securely. All in seconds.

Simple Fit installation is available with inside mount only, outside mount is available upon request.

simple fit


All shades need a smooth, clean surface before installation.

Artisan Custom Shades

Step by Step Inside Mount
No Tools Installation for Artisan Custom Shades Featuring Simple Fit

Before Starting: Double Check

Check for a proper fit by holding shade in the window location for mounting. The Trigger End Mount should be on the right side of your shade.

peel

Step 1:

  • Peel the tape liner from each Mounting Plate.
  • Place the Fixed End Mount of the shade in the window frame then raise and place the Trigger End Mount in to position.
push button install

Step 2:

Lock your shade in place by pressing the Trigger inward with a light touch.

Check to ensure a red warning line is not visible on Trigger End side of shade. If warning line is visible, remove and reinstall with a Spacer. Head to the FAQ for steps on how to do this. After reinstallation, if the warning line continues to be visible, please contact us.

For outside mount measurement and installation, removal, questions, or troubleshooting over to our FAQ, give us a call  1-888-608-6611 or Live Chat.

Artisan Select Shades

Step by Step Inside Mount
No Tools Installation for Artisan Select Shades Featuring Simple Fit

Before Starting: Double Check

Check for a proper fit by holding shade in the window location for mounting. The Trigger End Mount should be on the right side of your shade.

peel

Step 1:

  • Peel the tape liner from each Mounting Plate.
  • Place the Fixed End Mount of the shade in the window frame then raise and place the Trigger End Mount in to position.
push button install

Step 2:

Lock your shade in place by pressing the Trigger inward with a light touch.

Check to ensure a red warning line is not visible on Trigger End side of shade. If warning line is visible, remove and reinstall with a Spacer. Head to the FAQ for steps on how to do this. After reinstallation, if the warning line continues to be visible, please contact us.

For outside mount installation, removal, questions or to troubleshoot head over to our FAQ, give us a call
1-888-608-6611 or Live Chat.

Easy Lift Shades

Step by Step Measure & No Tools Installation for Easy Lift Shades

Measure Window:

Measure Window

Using a tape measure for each window measure the window width in 3 locations. Use the smallest measurement.

Install Shade:

trim

Step 1: Trim

  • Remove bottom rail end caps.
  • Place cutting guide at exact desired width. (No clearance deduction needed; it’s already included).
  • Position the knife blade at an angle on the top of the shade at your exact measurement.
  • Press firmly cutting through rails and fabric with a rocking motion and constant pressure.
  • Trim each side of the shade to the same exact window measurement.
  • Replace end caps on bottom rail.

Head to the installation guide for more photos and videos.

peel

Step 2: Peel

Peel the liner.

install stick 

Step 3: Stick

Press firmly across width of shade to install it.

 

lift  

Raise & Lower Shade

Pull shade down to lower, push up to raise.

For outside mount measurement and installation, removal, questions, or troubleshooting head over to our FAQ, give us a call 1-888-608-6611 or Live Chat.

Original Shades

Step by Step Measure & No Tools Installation for Original Shades

Measure Window:

Measure Window

Using a tape measure for each window measure the window width in 3 locations. Use the smallest measurement.

Install Shade:

trim

Step 1: Trim

Trim the ends of your shade to fit the window using a knife.

peel

Step 2: Peel

Peel the liner.

install stick 

Step 3: Stick

Press firmly across width of shade to install it.

You can overlap two or more shades for larger size windows.

clips  

Raise & Lower Shade

Use the included clips to raise and lower the shade.

For outside mount measurement and installation, removal, questions, or troubleshooting head over to our FAQ, give us a call 1-888-608-6611 or Live Chat.

Sheer View Solar Shades

Step by Step Measure & No Tools Installation for Sheer View Shades

Measure Window:

Measure Window

Using a tape measure for each window measure the window width in 3 locations. Use the smallest measurement.

Install Shade:

trim

Step 1: Trim

Trim the ends of your shade to fit the window using a knife.

peel

Step 2: Peel

Peel the liner.

install stick 

Step 3: Stick

Press firmly across width of shade to install it.

You can overlap two or more shades for larger size windows.

clips  

Raise & Lower Shade

Use the included clips to raise and lower the shade.

For outside mount measurement and installation, removal, questions, or troubleshooting head over to our FAQ, give us a call 1-888-608-6611 or Live Chat.

Original Arch Shades

Step by Step Measure & No Tools Installation for Arch Shades

Measure Window:

Measure WindowOriginal Arch Shades are designed to be installed an inside mount and are designed to fit a perfect ½ round circle.

First check that the base of your window is a minimum depth of 1.5” to support the Arch Shade.


Next measure both the inside center height of the arched window, as well as the base of the window frame.  

The height or radius can be found by measuring from the base midpoint (or center) to the highest point of the arch.

To get the width or diameter, measure inside left to inside right of the window frame.

If you have elliptical shaped windows, please contact us for suggestions.


Install Shade:

trim

Step 1: Trim

Trim the ends of your shade to fit the window using a knife.

peel

Step 2: Peel

Peel the liner.

install stick 

Step 3: Stick

Place the shade into the arch holder, then into your window frame. Fan the Original Arch Shade open and position in the window, then stick the shade inside your window frame. Using both hands, press firmly along the bottom pleats.

For outside mount measurement and installation, removal, questions, or troubleshooting head over to our FAQ, give us a call 1-888-608-6611 or Live Chat.